DIY Edelrid Hexon Multifuel Stove With Vargo Titanium Hexagon Wood Stove



Before I purchased the Hexon Multifuel Stove, I did a lot of research and one of it was using with Vargo Hexagon Wood Stove. I have Noticed the nut of the Hexon Multifuel Stove size and the base plate of the Vargo Hexagon Wood Stove had the same size. It was a wild guess without physically seen it. There was no info on the internet that anyone has done it.

Took the gamble and guess what??!! I was right. This is a simple mod to use both stoves together. Takes less than a minute to get it done. Watch the video below

You might ask why the mod, reason simple if the Hexon Multifuel Stove fails, I have the Vargo Titanium Wood burning as backup. At the same time I do not have to bring along a wind screen or I have have 2 working stove, one on wood the other on gas.

There is only one item needed for this to work. A Presta Valve nut from a bicycle tube. 

This mod you can just leave the nut in place and with all the legs install back. The Hex hole on the Vargo matched perfectly with Hexon nut.



No comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...